Ipv6 Bgp Route Reflector Configuration Example - HP FlexFabric 12900E Series Configuration Manual

Total number of routes: 4
BGP local router ID is 3.3.3.3
Status codes: * - valid, > - best, d - dampened, h - history,
* > Network : 9::
NextHop : ::
PrefVal : 32768
MED
Path/Ogn: i
* i Network : 9::
NextHop : 9::1
PrefVal : 0
MED
Path/Ogn: i
* >i Network : 10::
NextHop : 9::1
PrefVal : 0
MED
Path/Ogn: i
* >i Network : 50::
NextHop : 10::2
PrefVal : 0
MED
Path/Ogn: 65008i
The output shows that Switch C has learned the route 50::/64.
# Verify that Switch C can ping hosts on network 50::/64. (Details not shown.)

IPv6 BGP route reflector configuration example

Network requirements
As shown in
Switch B, and between Switch C and Switch D.
Configure Switch C as a route reflector with clients Switch B and Switch D.
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
: 0
: 0
: 0
: 0
Figure 80, run EBGP between Switch A and Switch B, run IBGP between Switch C and
PrefixLen : 64
LocPrf
OutLabel
PrefixLen : 64
LocPrf
OutLabel
PrefixLen : 64
LocPrf
OutLabel
PrefixLen : 64
LocPrf
OutLabel
344
:
: NULL
: 100
: NULL
: 100
: NULL
: 100
: NULL