Configuring Common Console User Interface Settings (Optional) - HP 830 Series Configuration Manual

Step
4. Enable command
authorization.
5. Enable command
accounting.
6. Exit to system view.
7. Apply an AAA
authentication scheme to
the intended domain.
8. Create a local user and
enter local user view.
9. Set an authentication
password for the local user.
10. Specifies a command level
of the local user.
11. Specify terminal service for
the local user.
12. Configure common settings
for console login.
The next time you attempt to log in through the console port, you must provide the configured login
username and password.

Configuring common console user interface settings (optional)

Some common settings configured for a console user interface take effect immediately and can interrupt
the console login session. To save you the trouble of repeated re-logins, use a login method different from
console login to log in to the device before you change console user interface settings.
Command
command authorization
command accounting
quit
a. Enter ISP domain view:
domain domain-name
b. Apply an AAA scheme to
the domain:
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name
[ local ] | local | none |
radius-scheme
radius-scheme-name
[ local ] }
c. Exit to system view:
quit
local-user user-name
password { cipher | simple }
password
authorization-attribute level level
service-type terminal
See "Configuring common console
user interface settings (optional)."
28
Remarks
Optional.
By default, command authorization
is disabled. The commands
available for a user only depend on
the user privilege level.
Optional.
By default, command accounting is
disabled. The accounting server
does not record the commands
executed by users.
N/A
Optional.
By default, local authentication is
used.
For local authentication, configure
local user accounts.
For RADIUS or HWTACACS
authentication, configure the
RADIUS or HWTACACS scheme on
the device and configure
authentication settings (including the
username and password) on the
server.
For more information about AAA
configuration, see Security
Configuration Guide.
N/A
By default, no password is set.
Optional.
By default, the command level is 0.
By default, no service type is
specified.
Optional.