HP FlexFabric 12900E Series Configuration Manual page 361

[PE2-bgp-default-ipv6] peer 2.2.2.2 label-route-capability
[PE2-bgp-default-ipv6] quit
[PE2-bgp-default] quit
# Configure the static route to CE 2.
[PE2] ipv6 route-static 4::4 128 20::1
# Configure OSPF for the ISP.
[PE2] ospf
[PE2-ospf-1] area 0
[PE2-ospf-1-area-0.0.0.0] network 3.3.3.3 0.0.0.0
[PE2-ospf-1-area-0.0.0.0] network 1.1.0.0 0.0.255.255
[PE2-ospf-1-area-0.0.0.0] quit
[PE2-ospf-1] quit
4. Configure a static route on CE 1, with PE 1 as the default next hop.
<CE1> system-view
[CE1] ipv6 route-static :: 0 10::2
5. Configure a static route on CE 2, with PE 2 as the default next hop.
<CE2> system-view
[CE2] ipv6 route-static :: 0 20::2
Verifying the configuration
# Display the IPv6 BGP routing tables on PE 1 and PE 2. The output shows that each of them has
two IPv6 network routes. The following shows the output on PE 1:
[PE1] display bgp routing-table ipv6
Total number of routes: 5
BGP local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - dampened, h - history,
* > Network : 1::1
NextHop : 10::1
PrefVal : 32768
MED
Path/Ogn: ?
* >i Network : 4::4
NextHop : ::FFFF:3.3.3.3
PrefVal : 0
MED
Path/Ogn: ?
* > Network : 10::
NextHop : ::
PrefVal : 32768
MED
Path/Ogn: ?
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
: 0
: 0
: 0
PrefixLen : 128
LocPrf
OutLabel
PrefixLen : 128
LocPrf
OutLabel
PrefixLen : 64
LocPrf
OutLabel
349
:
: NULL
: 100
: 1279
:
: NULL