Configuring The Pc Network To Connect To The Ras 200I - Polycom RAS 200I Getting Started Manual

Setting up the Polycom RAS 200I Server

Configuring the PC Network to Connect to the RAS 200I

To configure network settings on your local computer
1
2
3
4
Polycom, Inc.
Record the original IP address and subnet mask of your computer, so
that you can restore these values after you have finished system
setup.
From the Start menu, choose Control Panel > Network Connections
> Local Area Connection Properties.
Select Internet Protocol (TCP/IP), and then click Properties.
In the Internet Protocol (TCP/IP) Properties dialog box, enter these
settings:
— IP address: 192.168.1.37
— Subnet mask: 255.255.255.0
— Default gateway: Leave blank, or do not change.
— Preferred DNS server: Leave blank, or do not change.
7