Syntax
display pppoe-client session packet
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dial-bundle-number number: Specifies a dialer bundle by its number in the range of 0 to1023. If this
option is not specified, this command displays protocol packet statistics for all PPPoE sessions.
Examples
# Display the protocol packet statistics for all PPPoE sessions.
<Sysname> display pppoe-client session packet
Bundle:
InPackets: 19
InBytes:
InDrops:
Bundle:
InPackets: 18
InBytes:
InDrops:
Table 1 Command output
Field
Bundle
Interface
InPackets
OutPackets
InBytes
OutBytes
InDrops
OutDrops
Related commands
reset pppoe-client session packet
display pppoe-client session summary
Use display pppoe-client session summary to display summary information about a PPPoE session.
1
816
0
2
730
0
dial-bundle-number number
[
Interface:
Eth1/1
OutPackets: 19
OutBytes:
816
OutDrops:
0
Interface:
Eth1/1
OutPackets: 18
OutBytes:
730
OutDrops:
0
Description
Dialer bundle to which a PPPoE session belongs.
Ethernet interface where the PPPoE session is present.
Number of incoming packets.
Number of outgoing packets.
Number of bytes received.
Number of bytes transmitted.
Number of discarded incoming packets.
Number of discarded outgoing packets.
2
]