Display Counters - HP MSR series Command Reference Manual

Syntax
display loopback-detection [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If loopback detection is enabled, this command also displays the detection interval and all ports in a
loop condition.
Examples
# Display information about loopback detection.
<Sysname> display loopback-detection
Loopback detection is running.
Detection interval is 30 seconds.
No port is detected with loopback.
Table 7 Command output
Field
Detection interval time is 30 seconds.
No port is detected with loopback.

display counters

Use display counters to display traffic statistics for interfaces.
Syntax
display counters { inbound | outbound } interface [ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Description
Loopback detection interval is 30 seconds.
No loops are detected on any port.
26