YASKAWA SGD7S-R70A Product Manual page 236

9.2 List of Parameters
9.2.2 List of Parameters
Parameter
No.
Pn631
9-36
Name
Input Signal Selections
2
11
/SEL0 (Program Step Selection Input 0) Signal Allocation
0 Active when CN1-40 input signal is ON (closed).
1 Active when CN1-41 input signal is ON (closed).
2 Active when CN1-42 input signal is ON (closed).
3 Active when CN1-43 input signal is ON (closed).
4 Active when CN1-44 input signal is ON (closed).
5 Active when CN1-45 input signal is ON (closed).
6 Active when CN1-46 input signal is ON (closed).

n. X 7 The signal is always active.
8 The signal is always inactive.
9 Active when CN1-40 input signal is OFF (open).
A Active when CN1-41 input signal is OFF (open).
B Active when CN1-42 input signal is OFF (open).
C Active when CN1-43 input signal is OFF (open).
D Active when CN1-44 input signal is OFF (open).
E Active when CN1-45 input signal is OFF (open).
F Active when CN1-46 input signal is OFF (open).
/SEL1 (Program Step Selection Input 1) Signal Allocation
 
n. X
The settings are the same as for /SEL0 (Program Step Selection
0 to F
Input 0) Signal Allocation.
/SEL2 (Program Step Selection Input 2) Signal Allocation
 
n. X
The settings are the same as for /SEL0 (Program Step Selection
0 to F
Input 0) Signal Allocation.
/SEL3 (Program Step Selection Input 3) Signal Allocation

n.X
The settings are the same as for /SEL0 (Program Step Selection
0 to F
Input 0) Signal Allocation.
Setting Setting Default
Range Unit Setting
0000h to
– 8543h
FFFFh
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
After
All Setup
restart
Reference
page 6-3
Reference
page 6-3
Reference
page 6-3
Reference
page 6-3
Continued on next page.
Refer-
ence
–