YASKAWA SGD7S-R70A Product Manual page 230

9.2 List of Parameters
9.2.2 List of Parameters
Parameter
No.
Pn514
9-30
Name
Output Signal
2
Selections 4

n. X Reserved parameter (Do not change.)
 
n. X Reserved parameter (Do not change.)
/PM (Preventative Maintenance Output) Signal Allocation
0 Disabled (the above signal output is not used).
1 Output the signal from the CN1-25 or CN1-26 output terminal.
2 Output the signal from the CN1-27 or CN1-28 output terminal.
 
n. X
3 Output the signal from the CN1-29 or CN1-30 output terminal.
4 Output the signal from the CN1-37 output terminal.
5 Output the signal from the CN1-38 output terminal.
6 Output the signal from the CN1-39 output terminal.

n.X Reserved parameter (Do not change.)
Setting Setting Default
Range Unit Setting
0000h to
– 0000h
0666h
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
After
All Setup
restart
Reference
page 6-5
Continued on next page.
Refer-
ence
–