65
1
Removing and installing speakers
Front speakers
Preparatory work
–
Remove upper section of fairing.
....................................................See Group 46
a
–
Remove interior trim.
•
Release the cable straps (arrows).
•
Disconnect plug (9).
•
Remove screws (3) and remove speaker
bezel (4) together with treble speaker.
8
9
10
KL650030
2
Treble speaker
•
Carefully straighten retaining lugs (arrow) on
speaker bezel (4) and remove treble speaker (2).
Bass speaker
•
Carefully lift bass speaker (5) clear of retaining
plate (1).
•
Disconnect plug (6) and remove speaker.
Loudspeaker box
•
Carefully lift bass speaker (5) clear of retaining
plate (1).
•
Pull cable (7) through grommet (8).
•
Remove bottom reflector (10).
....................................................See Group 46
a
•
[Left] Remove control unit for cruise control.
....................................................See Group 65
a
•
[Right] Remove intake duct.
....................................................See Group 46
a
•
Remove loudspeaker box.
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torques:
Reflector to fairing bracket ............................. 9 Nm
Retaining plate, cruise control control unit
to fairing bracket ............................................ 8 Nm
3
4
5
6
7
KL620030
65.3