Removing And Installing Abs Control Unit - BMW K 1200 LT 1999 Repair Manual

Removing and installing ABS
control unit
d
Warning:
All work on the ABS control unit must be carried out
by an authorised BMW workshop.
e
Caution:
Disconnect the negative battery terminal first, then
the positive one.
– Remove the battery.
.......................................See Group 00, Battery
a
– Drain front and rear brake systems.
– Remove left and right rear footrests.
....................................................See Group 46
a
– Remove left and right fairing side sections.
– Remove left and right battery covers.
d
Warning:
Comply with safety precautions when handling or
working with fuel.
– Remove fuel tank.
....................................................See Group 16
a
•
Remove securing screws (arrows) and remove
retaining plate for plug connectors.
•
Remove fasteners securing coolant expansion
tank.
•
Disconnect plug (2) from ABS control unit.
•
Remove control unit for reverser.
....................................................See Group 61
a
•
Remove the holder (arrow) for the front brake
lines from the main frame.
e
Caution:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle, because brake fluid
KL610070
destroys paint. Wrap cloths around the ends of the
pressure lines to prevent residual brake fluid escap-
ing.
•
Disconnect brake lines from ABS pressure mod-
ulator.
•
Remove screws (1) securing the battery carrier to
the frame.
1
2
KL340050
KL340180
34.15