Removing Fork Bridge - BMW K 1200 LT 1999 Repair Manual

Removing fork bridge

1
2
3
e
Caution:
Do not operate the handbrake lever when the brake
calipers have been removed.
Protect painted parts from scratching: apply adhe-
sive masking tape if necessary.
•
Remove screw (1) securing handlebar to fork
bridge.
•
Remove protective caps (arrow).
•
Use spanner to hold fixed tube at w/f 22 flats and
remove 2 nuts (2) securing fixed tubes in fork
bridge.
e
Caution:
Nut is secured with thread-locking compound; heat
if necessary, taking care not to overheat lines and
cables.
•
Remove fastener (4) securing fork bridge to
frame with socket and adapter for socket-head
screw, BMW No. 31 5 600.
L
Note:
Stud is a press-fit in angular-contact ball bearing, so
remove as a complete unit.
4
Inside trim is easily scratched, so cover with mask-
KL310020
ing tape or remove, if necessary.
•
Remove fork bridge.
•
Remove plug for ignition switch/steering lock (3).
4
31 5 600
KL310040
31.7