Removing and installing rear frame
L
Note:
Lower the windscreen if the main frame has to be re-
moved.
–
Disconnect negative cable from battery and in-
sulate it.
–
Remove left and right fairing side sections.
–
Remove left and right battery covers.
–
Remove left and right rear footrests.
–
Remove the front and rear seats.
–
Remove the rear-mounted components.
•
Disconnect plugs of rear wiring harness.
•
Disconnect fuse boxes from holder for seat latch
release.
•
Remove handwheel for adjusting spring strut
from holder.
•
Remove rear brake fluid expansion tank.
•
Remove coolant expansion tank.
•
Disconnect the aerial cable from the radio con-
trol unit.
•
Remove the aerial bracket.
•
Disconnect the positive terminal from the revers-
er retaining plate.
•
Disconnect the ABS plug from the ABS control
unit.
•
Remove the fasteners securing the holder for the
plug on the left of the rear frame.
•
Remove the fastener securing the reverser con-
trol unit to the holder.
•
Remove the reverser control unit.
....................................................See Group 00
a
46.40
46 5 640
•
Disconnect plug for wiring harness from holder
for reverser control unit.
•
Remove holder for reverser control unit.
•
Remove wiring harness from rear frame.
•
Remove 3 fasteners securing shield for reverser
control unit.
•
Remove shield for reverser control unit.
•
Secure rear frame to workshop crane,
BMW No. 46 5 640, with straps.
•
Remove fasteners securing exhaust to rear
frame.
•
Remove fastener securing battery tray to rear
frame on right.
KL460021