Removing and installing side case
–
Remove the number plate carrier.
–
Remove the top case.
–
Remove the rear carrier cover.
–
Remove the case trimmer.
•
[Left] Disassemble knob for seat latch.
•
[Right] Remove CD player, if applicable.
•
Slacken right or left rear footrest plate, as appli-
cable.
•
Remove fasteners for battery cover (1) on left or
right case, as applicable and loosen battery cov-
er.
•
Remove fasteners (2) securing case to rear
frame at bottom.
46.32
•
Remove fasteners (3) securing case to rear
frame at top.
1
•
Remove case.
•
Installation is the reverse of the removal proce-
dure.
X
KL460121
Case to rear frame M6 ................................... 9 Nm
Fairing screws ................................................ 2 Nm
2
KL180010
3
Tightening torques:
KL460380