BMW K 1200 LT 1999 Repair Manual page 133

Removing and installing voltage regulator
1
2
4
•
Remove screws (2).
•
Carefully open clips (1, 3, 4) and remove the
housing cover.
•
Remove the retaining screws (arrows).
•
Remove voltage regulator (5) with carbon brush-
es.
•
Installation is the reverse of the removal proce-
dure.
12.12
Replacing starter motor
Removing and installing starter motor
– Remove gearbox complete with starter motor.
....................................................See Group 23
a
3
KR120130
•
Remove screw (6) and remove the starter motor.
•
When reinstalling begin by introducing the starter
motor into the intermediate flange, then install
5
the gearbox and tighten screw (6).
X
Tightening torques:
Starter to gearbox .......................................... 6 Nm
Positive cable to starter motor........................ 6 Nm
Earth (ground) lead to cross-tube................... 6 Nm
KR120140
6
KL120080