BMW K 1200 LT 1999 Repair Manual page 208

00 8 581
1 2 3
•
Use a screwdriver to pry out sealing ring (1) of
actuating shaft.
•
Remove circlip (2) from gearbox housing.
e
Caution:
When removing, make sure that retaining ring (4) for
pawl (5) and driver (6) does not drop into the gear-
box housing.
•
Remove circlip (4) from actuating shaft.
•
Turn actuating shaft so that pawl does not en-
gage selector drum.
•
Using an M6 adapter, BMW No. 00 8 585, and
puller, BMW No. 00 8 580, pull the actuating
shaft out of the gearbox housing until spacer (3)
is clear.
•
Remove spacer (3).
•
Pull actuating shaft out of gearbox housing, re-
moving driver (6) and pawl (5) from the actuating
shaft.
00 8 582
4
00 8 585
5
6
KL230170
23.15