Removing And Installing Left Grip Tube - BMW K 1200 LT 1999 Repair Manual

1
Removing and installing left grip
tube
– [With heated grip] Remove left and right fairing
side sections.
....................................................See Group 46
a
– [With heated grip] Remove tank cover.
– [With heated grip] Remove handlebar trim.
– [With heated grip] Remove fork bridge cover.
•
[With heated grip] Disconnect plug (4) for the
heated grip.
•
[With heated grip] Pull cable shoe (3) out of
connector.
•
Remove fasteners (1) for grip.
•
[With heated grip] Pull grip complete with
cable (2) off handlebar, feeding cable through
bore (arrow) until clear.
•
Pull grip off handlebar.
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
e
Caution:
Make sure that lines and cables are routed correctly.
2
3
4
KL320050
32.5