In A Gravel Bed; Removing And Installing Mirror; Ror - BMW S 1000 RR 2010 Rider's Manual

In a gravel bed

6
with BMW Motorrad Race ABS
OE
and DTC
88
DTC shut-off
On very loose substrates (e.g. a
gravel bed on a racetrack), the
control interventions of the DTC
can attenuate the drive force
on the rear wheel until the rear
wheel no longer turns. In this
case, BMW Motorrad recom-
mends switching off the DTC
temporarily.
Note that the rear wheel will spin
z
in the loose substrate, and close
the throttle in a timely manner
before reaching a solid substrate.
Then, switch the DTC back on.
Removing and installing
mirror
Removing mirror
Make sure ground is level and
firm and park motorcycle.
Remove nuts 1 on left and
right and take off mirror.
Secure the paneling 2 on the
left and right to the fairing
bracket 3. If cable ties are
used, protect possible locations
of abrasion marks using an
adhesive strip.
Installing mirrors
Make sure ground is level and
firm and park motorcycle.
Remove fairing fastener.