BMW K 1200 LT 1999 Repair Manual page 62

Removing and installing fuel filter
•
Open the retainers (4).
•
Disconnect fuel hoses (1, 3) from fuel filter (2).
e
Caution:
Note correct direction of flow through fuel filter.
•
Connect fuel hoses (1, 3) to the new fuel filter (2).
•
Close retainers (4) with pliers,
BMW No. 13 1 500.
Installing the fuel-pump unit
•
Install the fuel-pump unit complete with gasket in
the fuel tank.
L
Note:
Make sure that the arrow on the underside of the
fuel tank points directly toward the arrows on the
fuel-pump unit.
•
Tighten the union nut with wrench,
BMW No. 16 1 710.
•
Install the fuel tank.
X
Tightening torques:
Union nut ..................................................... 30 Nm
Fuel tank to frame M 8 ................................. 21 Nm
Bridge to frame M 8 ..................................... 21 Nm
Bridge to frame M 6 ....................................... 9 Nm
00.59