Rear speakers
–
Disengage retaining strap (6) from lower section
of top case.
•
Remove screws (arrows) and remove armrest (1)
with speakers from top case.
•
Disconnect contacts from speakers (2).
•
Remove fasteners (4) and remove retainers (3).
•
Remove treble loudspeaker (5), if necessary.
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
•
Position treble loudspeaker over small aperture
in armrest (1).
X
Tightening torque:
Armrest to top case........................................ 1 Nm
65.4
1
Removing and installing radio/
cassette player
Preparatory work
–
Remove tank cover with the control unit for the
radio.
....................................................See Group 46
a
KL650060
6
•
Remove fasteners (arrows) and remove wiring-
harness cover (6).
•
Remove fasteners (arrows) and remove lower
section of tank cover (7) with radio/cassette
player.
3
2
4
5
KL460161
KL650070
7
KL650080