11
10
9
Disassembling left multi-function
switch
Preparatory work
e
Caution:
Disconnect ground lead from battery and insulate.
–
Remove left-hand handlebar trim.
....................................................See Group 46
a
–
Remove left and right fairing side sections.
–
Remove cover of fork bridge.
•
Open cable ties on handlebar.
•
Release fastener (2) and swing radio control
unit (5) clear.
•
Release fasteners (9) and remove holder (8).
•
Release fastener (3) and remove radio control
unit (5) with rear panel (4).
•
Release fastener (10) and remove lower
cover (7).
Removing and installing radio control
unit
d
Warning:
Comply with safety precautions when handling or
working with fuel.
•
Remove fuel tank.
....................................................See Group 16
a
•
Remove air outlet duct for left radiator.
6
7
8
•
Press radiator out of holder.
•
Open the cable ties (arrows).
•
Disconnect plug (12) at retaining plate.
•
Pull cable through toward handlebar and remove
radio control unit.
•
Installation is the reverse of the removal proce-
dure.
Removing and installing clutch switch
•
Remove multi-function switch (1).
•
Release clutch switch (11).
1
2
3
4
5
12
KL320051
KL460210
61.15