Removing Left Multi-Function Switch; Disassembling Right Multi-Function Switch; Removing And Installing Right Multi-Function Switch - BMW K 1200 LT 1999 Repair Manual

1
•
Disconnect plugs (1) at fairing bracket.
•
Open the cable ties.
•
Pull cable through toward handlebar and remove
switch.
•
Installation is the reverse of the removal proce-
dure.

Removing left multi-function switch

d
Warning:
Comply with safety precautions when handling or
working with fuel.
•
Remove fuel tank.
•
Remove the intake air pipe.
•
Remove the air output from the right-hand radia-
tor.
•
Press the right-hand radiator out of its holder.
•
Release fastener securing multi-function switch
to handlebar fitting and remove multi-function
switch.
•
Release fastener securing clutch switch to han-
dlebar fitting.
•
Remove bottom cover of electronics box.
3
•
Open the cable ties (arrows).
•
Disconnect plugs (2, 3).
•
Pull cables through toward handlebar and re-
move the multi-function switch.
•
Installation is the reverse of the removal proce-
dure.
61.16
Disassembling right multi-function
switch
e
Disconnect ground lead from battery and insulate.
–
a
–
–
Removing and installing right
multi-function switch
KL610170
d
Comply with safety precautions when handling or
working with fuel.
–
–
–
–
2
•
KL610150
Caution:
Remove left and right fairing side sections.
....................................................See Group 46
Remove right-hand handlebar trim.
Remove cover of fork bridge.
Warning:
Remove fuel tank.
Remove the intake air pipe.
Remove the air output from the right-hand radia-
tor.
Press radiator out of holder.
Release the fasteners (arrows) and remove the
bottom cover of the electronics box.
KL610140