Removing And Installing Skirt Bracket; Removing And Installing Crash Bar - BMW K 1200 LT 1999 Repair Manual

Removing and installing skirt
bracket
– Remove right or left fairing side section and en-
gine spoiler, as applicable.
•
Open cable tie on skirt bracket (1).
6
•
[Right] Disconnect plug (6) at rear of skirt brack-
et.
•
[Right] Remove retaining clip (7) with washer.
•
Remove fasteners (2, 5) and remove skirt brack-
et.
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torque:
Skirt bracket M8........................................... 21 Nm
46.26
5

Removing and installing crash bar

7
12
11
•
Release fasteners (10) and remove cover for
skirt (9).
•
Release fasteners (8, 11) and remove skirt (12).
KL170060
•
Release fastener (4) and remove crash bar (3).
X
Tightening torque:
Crash bar to skirt bracket............................... 9 Nm
1
3
4
KL460030
KL460200
2
8
9
10