Disassembling/Assembling Output Shaft; Disassembling Output Shaft - BMW K 1200 LT 1999 Repair Manual

14
15
16
17
Disassembling/assembling output
shaft

Disassembling output shaft

e
Caution:
To avoid damaging the needle roller bearing on the
splines, spread the rollers carefully at the end face
when removing.
00 7 500
•
Use universal puller, BMW No. 00 7 500, to re-
move grooved ball bearing (19) together with
shift gearwheel for 1st gear (17) and shim (18).
1
2
3
4
13
12
11
10
18
19
19
17
KR230110
5
6
9
8
7
•
Remove needle roller bearing (16).
•
Remove the sliding gearwheel for 4th gear (7).
•
Remove circlip (8), backup washer (9), shift gear-
wheel for 3rd gear (10) and needle roller
bearing (11).
•
Remove 5th stage spur gear (12) of reverser.
•
Remove circlip (13) and sliding gearwheel for
5th gear (14).
•
Turn output shaft (6) other way round and clamp
into the vise with soft jaws.
•
Use universal puller, BMW No. 00 7 500, to pull
off grooved ball bearing (1).
•
Remove shim washer (2), needle roller
bearing (3), shift gearwheel for 2nd gear (4) and
thrust washer (5).
KL230210
23.21