1
2
Removing and installing fairing side
section
Removing and installing mirror
4 5
6
L
Note:
The gap at the mirror can be evened out by means
of washers (4, 5) on the front bolt.
•
Hold the mirror casing with one hand and remove
it by gently tapping/pressing with the other.
•
Hold the mirror casing with one hand and install
it by gently tapping/pressing with the other.
•
Check that the gap around the mirror is uniform.
•
If necessary, use washers (4, 5) to adjust the
gap.
46.8
Removing and installing fin
•
Release 3 fasteners (2).
•
Remove fin (1).
Removing and installing front turn
indicator
•
Remove fasteners (3) at front.
•
Disengage front turn indicator housing.
•
Disengage turn indicator bulb.
•
Remove turn indicator housing.
KL460180
3
KL460010