e
Caution:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle, because brake fluid
destroys paint. Wrap cloths around the ends of the
pressure lines to prevent residual brake fluid escap-
ing.
•
Drain the brake system.
•
Open cable ties securing brake hoses, as neces-
sary.
•
Disconnect brake lines (arrows) from ABS pres-
sure modulator.
Brake lines under fuel tank
•
Remove holder (arrow) for brake lines from main
frame.
34.20
1
•
Remove retaining plate (3) for brake lines at front
of main frame.
•
Disconnect brake lines (1) and remove.
Brake line/hose to telescopic fork
•
Remove the brake callipers.
•
Disconnect the brake hoses from the brake calli-
pers.
KL000140
e
Caution:
Screws (arrows) for retaining plates are secured
with thread-locking compound. Carefully heat the
securing screws; take care not to damage the sock-
et heads when removing the screws.
KL340180
•
Remove screw securing retaining plate (5) of left
brake line/hose to front fork.
•
Remove securing screw (4) from holder for brake
distributor.
•
Remove retaining plate for brake distributor, if
necessary.
•
Remove banjo bolt (2) from retaining plate (3)
and remove brake line/hose.
2
KL310170
4
5
KR340200
3