Table of Contents
Advertisement
Installing mirrors
7
112
Install mirror 4.
Tighten nut 2 with vehicle
tools.
Locknut (mirror) on
z
clamping piece
Joint compound: Multi-Wax
Spray
15 lb/ft (20 Nm)
Fit protective cap 1.
Removing and installing
license-plate carrier
Removing license-plate
carrier
Park motorcycle, ensuring that
support surface is firm and
level.
Remove passenger seat
(
62).
Remove cable strap (arrow)
and disconnect plug connec-
tion 1 for license-plate carrier.
NOTICE
If the license plate carrier is re-
moved for racetrack use, the
vehicle's electronic monitoring
system will interpret this as a de-
fective lamp or bulb and the cor-
responding warning message will
appear in the display. This warn-
ing message is suppressed by
activating the EQIP WARN LAMP
function in the SETUP MENU.
Work the plug connection 1
with the cable out through
lower rear section 2.
Advertisement
Table of Contents
