Removing And Installing Fairing Bracket - BMW R 1150 GS Repair Manual

2
1
Removing and installing fairing
bracket
e
Caution:
Switch off ignition.
Disconnect earth (ground) lead from battery.
Insulate earth (ground) lead.
•
Remove the indicator lenses, disconnect plug
and pull the cable through the indicator mount.
•
Remove the turn indicators.
•
Remove top section of mudguard.
•
Remove windscreen.
•
Remove top cover.
•
Remove headlight glass (1).
•
Remove headlight holder and disconnect plug.
•
Remove headlight holder complete with
headlight (2).
•
Release instrument cluster (3) and pull it up until
it is clear of the front mount.
L
Note:
Carefully pull thrust pad (5) on bracket of instrument
carrier out of the front mount (4).
•
Release left or right oil cooler line.
•
Remove fasteners securing oil cooler and swing
it aside; fix it in position with a cable tie if neces-
sary.
•
Remove the front mount.
•
Release the wiring harness from fairing
bracket (6).
4
•
Remove fairing bracket (6).
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torque:
Front mount to fairing bracket ........................ 8 Nm
Fairing bracket to frame ............................... 21 Nm
Horn to holder
(clean thread + Loctite 243).......................... 10 Nm
3
6
5
R21460020
46.11