Display Ipv6 Fib Vpn-Instance Ipv6-Address - HP 5800 series Command Reference Manual

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all IPv6 FIB information of VPN instance vpn1.
<Sysname> display ipv6 fib vpn-instance vpn1
FIB Table:
Total number of Routes : 1
Flag:
U:Useable
Destination:
NextHop
Label
Interface
Table 143 Command output
Field
Total number of Routes
Flag
Label
Token
Interface

display ipv6 fib vpn-instance ipv6-address

Description
Use the display ipv6 fib vpn-instance ipv6-address command to display a VPN's IPv6 FIB information that
matches a destination IPv6 address.
If you do not specify the prefix length, the command displays the matched IPv6 FIB information that has
the longest prefix. If you specify the prefix length, the command displays the matched IPv6 FIB information
that has the exact prefix length.
G:Gateway H:Host
::1
: ::1
: Null
: InLoopBack0
B:Blackhole D:Dynamic
Description
Total number of matched routes in the FIB
Flag of the route. Possible values are:
•
U—Usable route
•
G—Gateway route
•
H—Host route.
•
B—Blackhole route
•
D—Dynamic route
•
S—Static route.
Label value added to a packet
LSP index, used to associate an NHLFE entry
Outgoing interface of packets
358
S:Static
PrefixLength : 128
Flag : UH
Token : Invalid