Filter-Policy Export (Bgp-Vpnv6 Subaddress Family View) - HP 5800 series Command Reference Manual

[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] export route-policy poly-1
# Apply export routing policy poly-3 to the IPv6 VPN of VPN instance vpn3.
<Sysname> system-view
[Sysname] ip vpn-instance vpn3
[Sysname-vpn-instance-vpn3] ipv6-family
[Sysname-vpn-ipv6-vpn3] export route-policy poly-3

filter-policy export (BGP-VPNv6 subaddress family view)

Description
Use the filter-policy export command to filter all or certain types of routes to be advertised.
Use the undo filter-policy export command to remove the configuration.
By default, MP-BGP does not filter routes to be advertised.
Only routes that survive the filtering are advertised by MP-BGP.
If you do not specify routing protocol parameters for the filter-policy export command, all routes to be
advertised are filtered.
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ direct | isisv6 process-id | ospfv3
process-id | ripng process-id | static ]
undo filter-policy export [ direct | isisv6 process-id | ospfv3 process-id | ripng process-id | static ]
View
BGP-VPNv6 subaddress family view
Default level
2: System level
Parameters
acl6-number: Specifies the IPv6 ACL number, ranging from 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies an IPv6 address prefix list by its name, which is a string of 1 to 19
characters.
direct: Filters direct routes to be advertised.
isisv6 process-id: Filters IPv6 ISIS routes to be advertised that are from a specific IPv6 ISIS process. The
process-id parameter is ranging from 1 to 65,535.
ospfv3 process-id: Filters OSPFv3 routes to be advertised that are from a specific OSPFv3 process. The
process-id parameter is ranging from 1 to 65,535.
ripng process-id: Filters RIPng routes to be advertised that are from a specific RIPng process. The process-
id parameter is ranging from 1 to 65,535.
static: Filters static routes to be advertised.
Examples
# In BGP-VPNv6 subaddress family view, use ACL 2555 to filter routes to be advertised by MP-BGP.
<Sysname> system-view
361