Display Mpls Rsvp-Te Peer - HP 5800 series Command Reference Manual

Table 51 Command output
Field
Interface
Token Bucket rate
Peak Data Rate
Tunnel Dest
Ingress LSR ID
Next Hop Addr

display mpls rsvp-te peer

Description
Use the display mpls rsvp-te peer command to display information about RSVP-TE neighbors on the
specified or all interfaces.
Syntax
display mpls rsvp-te peer [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display information about RSVP-TE neighbors on all interfaces.
<Sysname> display mpls rsvp-te peer
Interface Vlan-interface3
Neighbor Addr: 80.4.1.1
SrcInstance: 841
PSB Count: 0
Hello Type Sent: ACK
SRefresh Enable: NO
Graceful Restart State: Ready
Restart Time: 200 sec
Description
RSVP-TE enabled interface
Token bucket rate, a traffic parameter
Peak rate, a traffic parameter
Tunnel destination, in the format of X.X.X.X
Ingress LSR ID, in the format of X.X.X.X
Next hop address, in the format of X.X.X.X
NbrSrcInstance: 928
RSB Count: 1
Neighbor Hello Extension: ENABLE
Reliability Enable: YES
Recovery Time: 150 sec
128