Display Mpls Rsvp-Te Reservation - HP 5800 series Command Reference Manual

display mpls rsvp-te reservation

Description
Use the display mpls rsvp-te reservation command to display information about RSVP-TE reservations on
the specified or all interfaces.
Syntax
display mpls rsvp-te reservation [ interface interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display information about RSVP-TE reservations on interface VLAN-interface 3.
<Sysname> display mpls rsvp-te reservation interface vlan-interface 3
Interface Vlan-interface3
Tunnel Dest: 29.29.29.29
LSP ID: 1
Upstream Label: -----
Token bucket rate: 0.00
# Display information about RSVP-TE reservations on all interfaces.
<Sysname> display mpls rsvp-te reservation
Interface Vlan-interface3
Tunnel Dest: 29.29.29.29
LSP ID: 1
Upstream Label: -----
Token bucket rate: 0.00
Interface: Outgoing-Interface at the Egress
Tunnel Dest: 19.19.19.19
LSP ID: 1
Upstream Label: 3
Token bucket rate: 0.00
Ingress LSR ID: 19.19.19.19
Tunnel ID: 1
Token bucket size: 0.00
Ingress LSR ID: 19.19.19.19
Tunnel ID: 1
Token bucket size: 0.00
Ingress LSR ID: 29.29.29.29
Tunnel ID: 1
Token bucket size: 0.00
133