HP 5800 series Command Reference Manual page 290

Commands and command syntax options
Hide thumbs Also See for 5800 series:
Table of Contents

Advertisement

Field
Peers in established state
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
# Display detailed information about BGP VPNv4 peers of VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 peer verbose
Peer: 10.1.1.1
Type: EBGP link
BGP version 4, remote router ID 10.1.1.1
BGP current state: Established, Up for 00h19m26s
BGP current event: KATimerExpired
BGP last state: OpenConfirm
Port:
Local - 179
Configured: Active Hold Time: 180 sec
Received
: Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Received: Total 25 messages, Update messages 1
Sent: Total 30 messages, Update messages 4
Maximum allowed prefix number: 150000
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
ORF advertise capability based on Prefix(type 64):
Local: both
Negotiated: send
Peer Preferred Value: 99
BFD: Enabled
Routing policy configured:
No routing policy is configured
Description
Number of peers in the state of established
IP address of the peer
AS number of the peer group
Number of messages received
Number of messages sent
Number of messages waiting to be sent to the peer
Number of received prefixes
Duration of the BGP session in the current state
Status of the peer
Local: 2.2.2.2
Remote - 1025
281
Keepalive Time:60 sec

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5820x series

Table of Contents