HP 5800 series Command Reference Manual page 151

Parameters
area-id: Specifies the area ID. For OSPF, it ranges from 0 to 4,294,967,295. For IS-IS, it takes the value of
1 or 2.
ip-address: Specifies the IP address of an interface.
network-lsa: Displays TEDB information in network LSAs.
node: Displays the TEDB information on nodes. If you do not specify a node, the TEDB information on all
nodes is displayed.
mpls-lsr-id: Specifies a node by its MPLS LSR ID.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display TEDB information in network LSAs.
<Sysname> display mpls te cspf tedb network-lsa
Maximum Network LSA Supported:
Current Total Network LSA Number:
Id DR MPLS LSR-Id
1 104.4.4.4
2 104.4.4.4
Table 61 Command output
Field
ID
DR MPLS LSR-Id
DR-Address
IGP
Process-Id
Area
Neighbor
# Display all TEDB information.
<Sysname> display mpls te cspf tedb all
Maximum Node Supported: 128
Current Total Node Number: 4
Id MPLS LSR-Id
1 104.4.4.4
2 105.5.5.5
2048
DR-Address IGP
45.1.1.4 OSPF 1
45.1.1.4 ISIS 1
IGP Process-Id
OSPF 1
OSPF 1
142
2
Process-Id Area
0
Level-2
Description
Number
MPLS LSR ID of the DR
Interface address of the DR
Interior gateway protocol: OSPF or IS-IS
IGP process ID
Area to which the router belongs
Neighbor router ID
Maximum Link Supported: 2048
Current Total Link Number: 4
Area
0
0
Neighbor
105.5.5.5
104.4.4.4
104.4.4.4
105.5.5.5
Link-Count
1
1