HP 5800 series Command Reference Manual page 156

Table 66 Command output
Field
LSP-ID
Destination
In/Out-IF
Name
# Display detailed information about MPLS TE tunnels.
<Sysname> display mpls te tunnel verbose
No : 1
LSP-Id : 1.1.1.9:1024
Tunnel-Name : Tunnel0
Destination : 3.3.3.9
In-Interface : -
Out-Interface : Vlan3
Ingress LSR-Id : 1.1.1.9
Egress LSR-Id : 3.3.3.9
Setup-Priority : 7
Hold-Priority : 7
Sign-Protocol : RSVP TE
Resv Style : SE
IncludeAnyAff : 0x0
ExcludeAllAff : 0x0
IncludeAllAff : 0x0
Created Time : 2004/10/18 16:05:17
Table 67 Command output
Field
No
LSP-Id
Tunnel-Name
Destination
In-Interface
Out-Interface
Ingress LSR-Id
Egress LSR-Id
Setup-Priority
Hold-Priority
Sign-Protocol
Resv Style
IncludeAnyAff
Description
LSP ID of tunnel
Destination router ID
Incoming/outgoing interface
Tunnel name configured on the ingress node
Description
Number
LSP ID of tunnel
Tunnel name configured on the ingress node
Destination router ID
Incoming interface
Outgoing interface
Ingress LSR ID
Egress LSR-ID
Setup priority of link
Holding priority of link
Signaling protocol
Reservation style
Any affinity properties that must be included
147