HP 5800 series Command Reference Manual page 15

ip-address: Specifies the IP address of the peer.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the BGP VPNv4 peers of the VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1
Peer
10.1.1.1
Table 4 Command output
Field
BGP Local router ID
local AS number
Total number of peers
Peers in established state
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
# Display detailed information about BGP VPNv4 peers of VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 peer verbose
Peer: 10.1.1.1
Type: EBGP link
BGP version 4, remote router ID 10.1.1.1
BGP current state: Established, Up for 00h19m26s
BGP current event: KATimerExpired
BGP last state: OpenConfirm
AS MsgRcvd MsgSent
200 24 29
Description
Router ID of the local BGP router
Local AS number
Total number of peers
Number of peers in the state of established
IP address of the peer
AS number of the peer group
Number of messages received
Number of messages sent
Number of messages waiting to be sent to the peer
Number of received prefixes
Duration of the BGP session in the current state
Status of the peer
Local: 2.2.2.2
Peers in established state : 1
OutQ PrefRcv Up/Down
0 1 00:18:47
6
State
Established