HP 5800 series Command Reference Manual page 16

Commands and command syntax options
Hide thumbs Also See for 5800 series:
Table of Contents

Advertisement

Port:
Local - 179
Configured: Active Hold Time: 180 sec
Received
: Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Received: Total 25 messages, Update messages 1
Sent: Total 30 messages, Update messages 4
Maximum allowed prefix number: 150000
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
ORF advertise capability based on Prefix(type 64):
Local: both
Negotiated: send
Peer Preferred Value: 99
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 5 Command output
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
Up for
BGP current event
BGP last state
Port
Configured
Received
Negotiated
Peer optional capabilities
Peer support bgp multi-protocol extended
Remote - 1025
Keepalive Time:60 sec
Description
IP address of the peer.
IP address of the local router.
BGP type.
Version of BGP that the peer runs.
Router ID of the remote router.
Current status of the BGP session.
Duration since the peer is established.
Current event of the BGP session.
State that the BGP session was in before transitioning to the
current status.
Local and remote ports of the BGP session.
Settings of the local timers, including the active hold interval
and keepalive interval.
Received active hold interval.
Negotiated active hold interval and keepalive time.
Optional capabilities of the peer.
The peer supports multiprotocol extension.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5820x series

Table of Contents