HP 5800 series Command Reference Manual page 77

Peer-ID
--------------------------------------------------------------------------
1.1.1.1:0
--------------------------------------------------------------------------
LAM : Label Advertisement Mode
Table 29 Command output
Field
Peer-ID
Status
SsnRole
KA-Sent/Rcv
# Display detailed information about all public network LDP sessions.
<Sysname> display mpls ldp session verbose
LDP Session(s) in Public Network
--------------------------------------------------------------------------
Peer LDP ID : 1.1.1.1:0
TCP Connection : 3.3.3.3 -> 1.1.1.1
Session State : Operational
Session FT Flag : Off
Reconnect Timer : ---
Negotiated Keepalive Timer
Keepalive Message Sent/Rcvd
Label Advertisement Mode
Label Resource Status(Peer/Local) : Available/Available
Peer Discovery Mechanism
Session existed time
LDP Extended Discovery Source
Addresses received from peer: (Count: 2)
10.1.1.1
--------------------------------------------------------------------------
Peer LDP ID : 2.2.2.2:0
TCP Connection : 3.3.3.3 -> 2.2.2.2
Status LAM SsnRole
Operational DU Active
: 45 Sec
: 6/6 (Message Count)
: Downstream Unsolicited
: Extended
: 000:00:01
: Remote peer: 1
1.1.1.1
68
FT MD5 KA-Sent/Rcv
Off Off 4582/4582
FT : Fault Tolerance
Description
LDP identifier of the peer. See
description of LDP ID.
Session status, including:
•
Non Existent: The TCP connection is not
established yet.
•
Initialized: The TCP connection is established.
•
Open-Received: Received an acceptable
initialization message.
•
Open-Sent: Sent an initialization message.
•
Operational: The LDP session is established.
Role of the current LSR in the session, Active or
Passive.
Counts of keepalive messages sent by/received on
the local LSR.
Local LDP ID : 3.3.3.3:0
Session Role : Active
MD5 Flag : Off
Recovery Timer : ---
(DDD:HH:MM)
Local LDP ID : 3.3.3.3:0
Table 24 for detailed