Display Mpls Ldp Session - HP 5800 series Command Reference Manual

Field
Transport Address
Hello Message Sent/Rcvd

display mpls ldp session

Description
Use the display mpls ldp session command to display information about LDP sessions.
If you do not specify any parameter, the command displays information about all public network LDP
sessions.
Related commands: mpls ldp (interface view) and mpls ldp (system view).
Syntax
display mpls ldp session [ all [ verbose ] | [ vpn-instance vpn-instance-name ] [ peer-id | verbose ] ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all information.
verbose: Displays detailed information.
vpn-instance vpn-instance-name: Displays information about all LDP sessions of a VPN instance. vpn-
instance-name indicates the name of the VPN instance, which is a case-sensitive string of 1 to 31
characters.
peer-id: Displays the LDP session information of a peer. peer-id indicates the LSR ID of the peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
•
exclude: Displays all lines that do not match the specified regular expression.
•
include: Displays all lines that match the specified regular expression.
•
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80
•
characters.
Examples
# Display information about all public network LDP sessions.
<Sysname> display mpls ldp session
Total number of sessions: 1
--------------------------------------------------------------------------
LDP Session(s) in Public Network
Description
Local LDP transport address used to establish a TCP
connection with this remote peer.
Counts of hello messages sent to/received from this remote
peer.
67