Its destination IPv6 address ANDed with the specified prefix equals the specified destination IPv6
•
address ANDed with the specified prefix.
Its prefix length is shorter than or equal to the specified prefix length.
•
Its prefix length is the longest among the entries meeting the above two conditions.
•
peer ip-address: Displays the routing information sent to or received from the specified peer. ip-address is
the IPv4 address of the peer.
advertised-routes: Displays the routing information sent to the specified peer.
received-routes: Displays the routing information received from the specified peer.
statistic: Displays BGP VPNv6 route statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all BGP VPNv6 routing information.
<Sysname> display bgp vpnv6 all routing-table
BGP Local router ID is 30.30.30.30.1
Status codes: * - valid, ^ - VPN best, > - best, d - damped,
Total number of routes from all PE: 1
Route Distinguisher: 100:1
*^ i Network : 30:30::
NextHop : ::FFFF:101:102
PrefVal : 0
MED
Path/Ogn: ?
Total routes of vpn-instance vpn1: 1
*^>
Network : 30:30::
NextHop : ::FFFF:101:102
PrefVal : 0
MED
Path/Ogn: ?
h - history,
i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
: 0
: 0
PrefixLen : 64
LocPrf
Label
PrefixLen : 128
LocPrf
Label
350
: 100
: 1024
: 100
: 1024