Display Ospf Sham-Link - HP 5800 series Command Reference Manual

DU Re-advertise Timer
DU Explicit Request
Label Distribution Mode : Ordered
Table 130 Command output
Field
Protocol Version
Neighbor Liveness
Graceful Restart
FT Reconnect Timer
MTU Signaling
Recovery Timer
VPN-Instance
Loop Detection
DU Re-advertise Timer
DU Re-advertise Flag
DU Explicit Request
Request Retry Flag
Label Distribution Mode
Label Retention Mode

display ospf sham-link

Description
Use the display ospf sham-link command to display information about sham links.
With neither process ID nor area ID specified, the command displays information about all configured
sham links.
Related commands: sham-link.
Syntax
display ospf [ process-id ] sham-link [ area area-id ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Specifies the OSPF process ID, ranging from 1 to 65,535.
: 30 Sec DU Re-advertise Flag : On
: Off Request Retry Flag
Label Retention Mode : Liberal
Description
Version of the LDP protocol.
Neighbor liveness timer of LDP GR.
Whether GR is enabled for LDP.
FT reconnect timer of LDP GR.
Whether MTU signaling is supported. The switch does
not support MTU signaling.
Recover timer of LDP GR.
Name of the LDP-enabled VPN instance.
Whether loop detection is enabled.
Label re-advertisement timer for DU mode.
Whether label re-advertisement is enabled for DU mode.
Whether explicit request transmission is enabled for DU
mode.
Whether request retransmission is enabled.
Label distribution control mode of the instance, Ordered
or Independent.
Label retention mode of the instance. The switch supports
only the Liberal mode.
301
: On