Display Mpls Rsvp-Te Sender - HP 5800 series Command Reference Manual

Field
Token Bucket size
Peak Data Rate
Maximum packet size
Minimum policed unit
Bandwidth guarantees
Delay guarantees
QOS service
Resv Message
Graceful Restart State

display mpls rsvp-te sender

Description
Use the display mpls rsvp-te sender command to display RSVP-TE sender message information.
Syntax
display mpls rsvp-te sender [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display the RSVP-TE sender message information on interface VLAN-interface 3.
<Sysname> display mpls rsvp-te sender interface vlan-interface 3
Interface Vlan-interface3;
Tunnel Dest: 29.29.29.29
LSP ID: 1
Session Name: Tunnel0
Previous Hop Address: 101.101.101.1
Token bucket rate: 0.0
Description
Token bucket size, a traffic parameter.
Peak data rate (in kbps), a traffic parameter.
Maximum packet size, a traffic parameter.
Minimum policed unit, a traffic parameter.
Guaranteed bandwidth, a reservation specifications parameter.
Delay guarantee, a reservation specifications parameter.
QoS guarantee/control.
Reservation message received on a particular interface from next hop (X.X.X.X).
State of GR: stale or normal. Displayed as --- when not supported by the device.
Ingress LSR ID: 19.19.19.19
Session Tunnel ID: 1
Token bucket size: 0.00
136