Display Pw-Class - HP 5800 series Command Reference Manual

# Display the detailed VPLS PW information.
<Sysname> display mpls l2vpn fib pw vpls verbose
Total VSI Entry:1
VSI Name : vsi1
**Link ID
In Interface
In VC Label
Out VC Label
Encapsulation Type
MTU
Role
State
Dual Link ID
Tunnel ID
Tunnel ID
Table 83 Command output
Field
Total VSI Entry
Total PW Entry
VSI Name
VSI Index
Link ID
In Interface
In VC Label
Out VC Label
MTU
Role
State
Dual Link ID
Tunnel ID

display pw-class

Description
Use the display pw-class command to display information about one or all PW class templates.
Total PW Entry:1
VSI Index: 0
: 1
: GigabitEthernet1/0/1
: 1000
: 1002
: Ethernet
: 1500
: Main
: Active
: 2
: 0x878ad000(Done)
GrCount:1
: 0x878ad001(Waiting)
GrCount:1
Description
Total number of VSI entries, which is displayed only when
you display all VPLS PW entries
Total number of VPLS PW entries, which is displayed only
when you display all VPLS PW entries
VPLS instance name
VPLS instance index
Link ID of a PW in the VPLS instance
Incoming interface—the interface bound to an L2VPN
Incoming VC label
Outgoing VC label
Maximum transmission unit
PW role, which can be Main, Backup, or Normal
PW state, active or standby
Link ID of the other PW, which is displayed when main
and backup PWs exist in the VPLS instance
Public tunnel ID and entry state (Done or Waiting)
GrCount: Number of times that GR occurs
209