HP 5800 series Command Reference Manual page 249

# Display L2VPN information with the RD being 100:1 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
CE ID Label Offset
4 0
Table 92 Command output
Field
Origin codes
bgp.l2vpn
CE ID
nexthop
pref
as-path
# Display L2VPN information with the RD being 100:1 and the CE ID being 4 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
CE ID Label Offset
1 0
Table 93 Command output
Field
Origin codes
CE ID
nexthop
pref
as-path
Label Base nexthop
132096 3.3.3.9
Label Base nexthop
8202 3.3.3.9
240
pref as-path
100
Description
Route origin codes, which can be:
i – IGP—Indicates that the network layer reachability
information is from within the AS
e – EGP—Indicates that the network layer
reachability information is learned through EGP
? – incomplete—Indicates that the network layer
reachability information is learned through other
ways
Number of BGP L2VPNs
CE number in the VPN
IP address of the next hop
Preference
AS-PATH of the route
pref as-path
100
Description
Route origin codes, which can be:
i – IGP—Indicates that the network layer reachability
information is from within the AS
e – EGP—Indicates that the network layer
reachability information is learned through EGP
? – incomplete—Indicates that the network layer
reachability information is learned through other
ways
CE number in the VPN
IP address of the next hop
Preference
AS-PATH of the route