Display Mpls L2Vpn Fib Pw Vpws - HP 5800 series Command Reference Manual

In Interface
------------------------------------------------------------
Vlan2
Table 108 Command output
Field
Total AC Entry
In Interface
ServiceID
AccessMode
CEType
EncapVlanID

display mpls l2vpn fib pw vpws

Description
Use the display mpls l2vpn fib pw vpws command to display the L2VPN PW information.
Syntax
display mpls l2vpn fib pw vpws [ interface interface-type interface-number [ service-instance service-
instanceid ] ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connecting a CE by its type and number.
service-instance service-instanceid: Specifies a service instance. service-instanceid is the service instance
ID, ranging from 1 to 4094.
verbose: Displays the detailed information.
slot slot-number: Displays the VPWS PW information on a member device in the IRF virtual device. The
slot-number parameter is the member number of the device in the IRF virtual device. The value range for
the slot-number parameter depends on the number of members and numbering conditions in the current
IRF virtual device. If no IRF virtual device exists, the slot-number parameter is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
ServiceID AccessMode
1000 Ethernet
CEType EncapVlanID
PortVlan 0
Description
Total number of VPWS AC entries, which is displayed
only when you display all VPWS AC entries
Incoming interface, which is bound to L2VPN
Service instance ID
Access mode at the AC side
Interface encapsulation type at the AC side, which can be
PortVlan or Independent
Encapsulation VLAN ID at the AC side
253