Filter-Policy Export (Bgp-Vpnv4 Subaddress Family View) - HP 5800 series Command Reference Manual

Syntax
ext-community-type { domain-id type-code1 | router-id type-code2 | route-type type-code3 }
undo ext-community-type { domain-id | router-id | route-type }
View
OSPF view
Default level
2: System level
Parameters
domain-id type-code1: Specifies the type code for the OSPF extended community attribute of Domain ID.
Valid values are 0x0005, 0x0105, 0x0205, and 0x8005.
router-id type-code2: Specifies the type code for the OSPF extended community attribute of Router ID.
Valid values are 0x0107 and 0x8001.
router-type type-code3: Specifies the type code for the OSPF extended community attribute of Route Type.
Valid values are 0x0306 and 0x8000.
Examples
# Configure the type codes of OSPF extended community attributes Domain ID, Router ID, and Route Type
as 0x8005, 0x8001, and 0x8000, respectively, for OSPF process 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] ext-communityroute-type domain-id 8005
[Sysname-ospf-100] ext-communityroute-type router-id 8001
[Sysname-ospf-100] ext-communityroute-type route-type 8000

filter-policy export (BGP-VPNv4 subaddress family view)

Description
Use the filter-policy export command to filter all or certain types of routes to be advertised.
Use the undo filter-policy export command to remove the configuration.
If you do not specify routing protocol parameters for the filter-policy export command, all routes to be
advertised are filtered.
By default, MP-BGP does not filter routes to be advertised.
Only routes that survive the filtering are advertised by MP-BGP.
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | isis process-id | ospf process-id |
rip process-id | static ]
undo filter-policy export [ direct | isis process-id | ospf process-id | rip process-id | static ]
View
BGP-VPNv4 subaddress family view
Default level
2: System level
306