Display Bgp Vpnv6 Vpn-Instance Peer - HP 5800 series Command Reference Manual

display bgp vpnv6 vpn-instance peer

Description
Use the display bgp vpnv6 vpn-instance peer command to display information about the IPv6 BGP peers
in the specified VPN instance.
If you do not specify any optional parameters, the command displays the brief information of all IPv6
BGP peers.
Syntax
display bgp vpnv6 vpn-instance vpn-instance-name peer [ ipv6-address verbose | verbose ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor
Parameters
vpn-instance-name: Specifies the name of a VPN instance, which is a case-sensitive string of 1 to 31
characters.
ipv6-address: Specifies the IPv6 address of a peer.
verbose: Displays the detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display brief information about the IPv6 BGP peers in the VPN instance vpn1.
<Sysname> display bgp vpnv6 vpn-instance vpn1 peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1
Peer
2001::1
Table 140 Command output
Field
BGP local router ID
Peer
Peers in established state : 1
AS MsgRcvd MsgSent OutQ PrefRcv Up/Down
200 4
Description
Router ID of the local BGP router
IPv6 address of the peer
353
6 0 2 00:00:09 Established
State