Display Mpls Nhlfe - HP 5800 series Command Reference Manual

Table 34 Command output
Field
Ingress
Transit
Egress
NOTE:
The HP 5800 switch series do not support CR-LDP generated CR-LSPs.

display mpls nhlfe

Description
Use the display mpls nhlfe command to display information about NHLFE entries.
With the token parameter not specified, the command displays information about all NHLFE entries.
Syntax
display mpls nhlfe [ token ] [ verbose ] [ slot slot-number ] [ include text | { | { begin | exclude | include }
regular-expression } ]
View
Any view
Default level
1: Monitor level
Parameters
token: NHLFE entry index. Specifies the value ranges from 0 to 102,399.
verbose: Displays the detailed information.
include text: Specifies NHLFE entries including a specified string.
slot slot-number: Displays the NHLFE entries on a member device in the IRF virtual device. The slot-number
parameter is the number of the member device in the IRF virtual device. The value range for the slot-
number parameter depends on the number of members and numbering conditions in the current IRF
virtual device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256
•
characters.
Examples
# Display information about a specified NHLFE entry.
<Sysname> display mpls nhlfe 2
Out-Interface Token Oper
76
Description
Number of LSPs taking the current LSR as ingress
Number of LSPs taking the current LSR as transit LSR
Number of LSPs taking the current LSR as egress
Nexthop Deep Stack