Display Mpls Ldp Remote-Peer - HP 5800 series Command Reference Manual

display mpls ldp remote-peer

Description
Use the display mpls ldp remote-peer command to display information about remote LDP peers.
Related commands: mpls ldp (interface view), mpls ldp (system view), and remote-ip.
Syntax
display mpls ldp remote-peer [ remote-name remote-peer-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
remote-name remote-peer-name: Displays information about a remote peer. remote-peer-name indicates
the name of the remote peer, which is a case-insensitive string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
•
exclude: Displays all lines that do not match the specified regular expression.
•
include: Displays all lines that match the specified regular expression.
•
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80
•
characters.
Examples
# Display information about remote peer BJI.
<Sysname> display mpls ldp remote-peer remote-name BJI
--------------------------------------------------------------------------
Remote Peer Name
Remote Peer IP
Transport Address : 1.1.1.1
Configured Keepalive Timer : 45 Sec
Configured Hello Timer
Negotiated Hello Timer
Hello Message Sent/Rcvd
--------------------------------------------------------------------------
Table 28 Command output
Field
LDP ID
LDP Remote Entity Information
: BJI
: 3.3.3.3 LDP ID : 1.1.1.1:0
: 45 Sec
: 45 Sec
: 3/2 (Message Count)
Description
Local LDP identifier. See
LDP ID.
Table 24
66
for detailed description of