HP 5800 series Command Reference Manual page 90

View
Any view
Default level
1: Monitor level
Parameters
lsp-name lsp-name: Specifies an LSP by its name, which is a string of 1 to 15 characters.
exclude: Specifies LSPs other than the one for the given FEC.
include: Specifies the LSP for the given FEC.
dest-addr mask-length: Specifies a FEC by its destination address and the length of the mask. The mask
length is ranging from 0 to 32.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
•
exclude: Displays all lines that do not match the specified regular expression.
•
include: Displays all lines that match the specified regular expression.
•
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256
•
characters.
Examples
# Display brief information about all static LSPs.
<Sysname> display mpls static-lsp
total statics-lsp : 1
Name
lsp1
# Display detailed information about all static LSPs.
<Sysname> display mpls static-lsp verbose
No
LSP-Name
LSR-Type
FEC
In-Label
Out-Label
In-Interface
Out-Interface
NextHop
Static-Lsp Type: Normal
Lsp Status
Table 40 Command output
Field
LSR-Type
FEC
2.2.2.0/24
: 1
: lsp1
: Ingress
: 2.2.2.0/24
: NULL
: 987
: -
: Vlan-interface3
: 2.2.2.3
: UP
I/O Label I/O If
NULL/987 -/Vlan3
Description
Role of the LSR for the LSP, which can be Ingress, Egress,
or Transit
81
State
UP