Display Mpls L2Vpn Fib Pw Vpls - HP 5800 series Command Reference Manual

Field
VSIName
VSIIndex
LinkID
# Display the detailed VPLS AC information.
<Sysname> display mpls l2vpn fib ac vpls verbose
Total VSI Entry:1
VSI Name : vsi1
**In Interface
Service Instance ID : 1000
Link ID
Access Mode
CE Type
AC Encap VlanID
GR Count
Table 81 Command output
Field
Total VSI Entry
Total AC Entry
In Interface
VSI Name
VSI Index
Link ID
Access Mode
CE Type
AC Encap VlanID
GR Count

display mpls l2vpn fib pw vpls

Description
Use the display mpls l2vpn fib pw vpls command to display the VPLS PW information.
Syntax
display mpls l2vpn fib pw vpls [ vsi vsi-name [ link link-id ] ] [ slot slot-number ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Description
VPLS instance name
VPLS instance index
Link ID of an AC in the VPLS instance
Total AC Entry:1
VSI Index: 0
: GigabitEthernet1/0/1
: 1
: Ethernet
: PortVlan
: 0
: 1
Description
Total number of VSI entries, which is displayed only when
you display all VPLS AC entries
Total number of VPLS AC entries, which is displayed only
when you display all VPLS AC entries
Incoming interface—the interface bound to an L2VPN
VPLS instance name
VPLS instance index
Link ID of an AC in the VPLS instance
Access mode at the AC side
Interface encapsulation type at the AC side, which can be
PortVlan or Independent
Encapsulation VLAN ID at the AC side
Number of times that GR occurs
207